SOLO Cut-Off Machine

SOLO Cut-off machines effortlessly cut their way through concrete, steel, asphalt, cast iron or stone.

They also set a new benchmark because ergonomic features, technical details and the ease of maintenance are quite unique in this engine class. All models are designed for the use of cutting wheel diameters of 12” / 300 mm or 14” / 350 mm. The 881-series is additionally equipped with the innovative separate lubrication system iLube®.

At the core of all SOLO Cut-off machines is the modern 81 cm3 high performance two-stroke power plant, developed and manufactured by SOLO in Sindelfingen, Germany . The power rating of 4 kW is more than sufficient to cut the hardest materials. Amazingly, these engines produce very low emission despite their high performance output.

879 – 12″ Cut-Off Machine

SOLO 879: Powerful for genuine hard work
SOLO Cut-off machines effortlessly cut their way through concrete, steel, asphalt, cast iron or stone. They also set a new benchmark because ergonomic features, technical details and the ease of maintenance are quite unique in this engine class.

All models are designed for the use of cutting wheel diameters of 12” / 300 mm or 14” / 350 mm. At the core of all SOLO Cut-off machines is the modern 81 cm3 high performance two-stroke power plant, developed and manufactured by SOLO in Sindelfingen, Germany . The power rating of 4 kW is more than sufficient to cut the hardest materials. Amazingly, these engines produce very low emission despite their high performance output.

879 – 12″ Datasheet

Sound pressure level dB(A) 94
Sound power level guaranteed dB(A) 108
Engine SOLO 2-stroke, 4-port scavenging
Capacity cm³ 81
Power kW/HP 4.0 / 5.45 ( at 9300 1/min)
Anti-vibration system
Weight kg 10.1
Digital electronic ignition
Fuel tank capacity, litres 0.9
Tank lid with over tightening prevention
Decompression valve
Twin-pipe air filter
Water connection set
Spindle diameter/shaft Ø mm 20
Weighted effective acceleration Rear handle / front handle m/s² 4.5 / 6.0
iLube®
Oil tank
Carburettor with primer
Automatic choke
Air filter with rocker wheel
K-value as per Directive 2006/42/EC 2,5 dB(A); 2 m/s2

879 – 14″ Cut-Off Machine

SOLO 879: Powerful for genuine hard work
SOLO Cut-off machines effortlessly cut their way through concrete, steel, asphalt, cast iron or stone. They also set a new benchmark because ergonomic features, technical details and the ease of maintenance are quite unique in this engine class.

All models are designed for the use of cutting wheel diameters of 12” / 300 mm or 14” / 350 mm. At the core of all SOLO Cut-off machines is the modern 81 cm3 high performance two-stroke power plant, developed and manufactured by SOLO in Sindelfingen, Germany . The power rating of 4 kW is more than sufficient to cut the hardest materials. Amazingly, these engines produce very low emission despite their high performance output.

879 – 14″ Datasheet

Sound pressure level dB(A) 94
Sound power level guaranteed dB(A) 108
Engine SOLO 2-stroke, 4-port scavenging
Capacity cm³ 81
Power kW/HP 4.0 / 5.45 ( at 9300 1/min)
Anti-vibration system
Weight kg 10.1
Digital electronic ignition
Fuel tank capacity, litres 0.9
Tank lid with over tightening prevention
Decompression valve
Twin-pipe air filter
Water connection set
Spindle diameter/shaft Ø mm 20
Weighted effective acceleration Rear handle / front handle m/s² 4.5 / 6.0
iLube®
Oil tank
Carburettor with primer
Automatic choke
Air filter with rocker wheel
K-value as per Directive 2006/42/EC 2,5 dB(A); 2 m/s2

880 – 12″ Cut-Off Machine

SOLO 880: Powerful for genuine hard work
SOLO Cut-off machines effortlessly cut their way through concrete, steel, asphalt, cast iron or stone. They also set a new benchmark because ergonomic features, technical details and the ease of maintenance are quite unique in this engine class. All models are designed for the use of cutting wheel diameters of 12” / 300 mm or 14” / 350 mm. At the core of all SOLO Cut-off machines is the modern 81 cm3 high performance two-stroke power plant, developed and manufactured by SOLO in Sindelfingen, Germany . The power rating of 4 kW is more than sufficient to cut the hardest materials. Amazingly, these engines produce very low emission despite their high performance output.

Model features of SOLO 880:

  • Carburettor with primer
  • Automatic choke
  • Air filter with rocker wheel

880 – 12″ Datasheet

Engine SOLO 2-stroke, 4-port scavenging
Capacity cm³ 81
Power kW/HP 4.0 / 5.45 ( at 9300 1/min)
Anti-vibration system
Weight kg 10.1
Digital electronic ignition
Fuel tank capacity, litres 0.9
Tank lid with over tightening prevention
Decompression valve
Twin-pipe air filter
Water connection set
Spindle diameter/shaft Ø mm 20
Weighted effective acceleration Rear handle / front handle m/s² 4.5 / 6.0
iLube®
Oil tank
Carburettor with primer
Automatic choke
Air filter with rocker wheel
K-value as per Directive 2006/42/EC 2,5 dB(A); 2 m/s2

880 – 14″ Cut-Off Machine

SOLO 880: Powerful for genuine hard work
SOLO Cut-off machines effortlessly cut their way through concrete, steel, asphalt, cast iron or stone. They also set a new benchmark because ergonomic features, technical details and the ease of maintenance are quite unique in this engine class. All models are designed for the use of cutting wheel diameters of 12” / 300 mm or 14” / 350 mm. At the core of all SOLO Cut-off machines is the modern 81 cm3 high performance two-stroke power plant, developed and manufactured by SOLO in Sindelfingen, Germany . The power rating of 4 kW is more than sufficient to cut the hardest materials. Amazingly, these engines produce very low emission despite their high performance output.

Model features of SOLO 880:

  • Carburettor with primer
  • Automatic choke
  • Air filter with rocker wheel

880 – 14″ Datasheet

Engine SOLO 2-stroke, 4-port scavenging
Capacity cm³ 81
Power kW/HP 4.0 / 5.45 ( at 9300 1/min)
Anti-vibration system
Weight kg 10.1
Digital electronic ignition
Fuel tank capacity, litres 0.9
Tank lid with over tightening prevention
Decompression valve
Twin-pipe air filter
Water connection set
Spindle diameter/shaft Ø mm 20
Weighted effective acceleration Rear handle / front handle m/s² 4.5 / 6.0
iLube®
Oil tank
Carburettor with primer
Automatic choke
Air filter with rocker wheel
K-value as per Directive 2006/42/EC 2,5 dB(A); 2 m/s2

881 – 12″ Cut-Off Machine

SOLO 881: Powerful for genuine hard work – additionally equipped with the innovative separate lubrication system iLube®

SOLO Cut-off machines effortlessly cut their way through concrete, steel, asphalt, cast iron or stone. They also set a new benchmark because ergonomic features, technical details and the ease of maintenance are quite unique in this engine class. All models are designed for the use of cutting wheel diameters of 12” / 300 mm or 14” / 350 mm. At the core of all SOLO Cut-off machines is the modern 81 cm3 high performance two-stroke power plant, developed and manufactured by SOLO in Sindelfingen, Germany . The power rating of 4 kW is more than sufficient to cut the hardest materials. Amazingly, these engines produce very low emission despite their high performance output.

Model features of SOLO 881:

  • iLube®
  • Carburettor with primer
  • Automatic choke
  • Air filter with rocker wheel

881 – 12″ Datasheet

Sound pressure level dB(A) 98
Sound power level guaranteed dB(A) 108
Engine SOLO 2-stroke, 4-port scavenging
Capacity cm³ 81
Power kW/HP 4.0 / 5.45 ( at 9300 1/min)
Anti-vibration system
Weight kg 10.4
Digital electronic ignition
Fuel tank capacity, litres 0.9
Tank lid with over tightening prevention
Decompression valve
Twin-pipe air filter
Water connection set
Spindle diameter/shaft Ø mm 20
Weighted effective acceleration Rear handle / front handle m/s² 4.5 / 6.0
iLube®
Oil tank 0.32 l
Carburettor with primer
Automatic choke
Air filter with rocker wheel
K-value as per Directive 2006/42/EC 2,5 dB(A); 2 m/s2

881 – 14″ Cut-Off Machine

SOLO 881: Powerful for genuine hard work – additionally equipped with the innovative separate lubrication system iLube®

SOLO Cut-off machines effortlessly cut their way through concrete, steel, asphalt, cast iron or stone. They also set a new benchmark because ergonomic features, technical details and the ease of maintenance are quite unique in this engine class. All models are designed for the use of cutting wheel diameters of 12” / 300 mm or 14” / 350 mm. At the core of all SOLO Cut-off machines is the modern 81 cm3 high performance two-stroke power plant, developed and manufactured by SOLO in Sindelfingen, Germany . The power rating of 4 kW is more than sufficient to cut the hardest materials. Amazingly, these engines produce very low emission despite their high performance output.

Model features of SOLO 881:

  • iLube®
  • Carburettor with primer
  • Automatic choke
  • Air filter with rocker wheel

881 – 14″ Datasheet

Sound pressure level dB(A) 98
Sound power level guaranteed dB(A) 108
Engine SOLO 2-stroke, 4-port scavenging
Capacity cm³ 81
Power kW/HP 4.0 / 5.45 ( at 9300 1/min)
Anti-vibration system
Weight kg 10.4
Digital electronic ignition
Fuel tank capacity, litres 0.9
Tank lid with over tightening prevention
Decompression valve
Twin-pipe air filter
Water connection set
Spindle diameter/shaft Ø mm 20
Weighted effective acceleration Rear handle / front handle m/s² 4.5 / 6.0
iLube®
Oil tank 0.32 l
Carburettor with primer
Automatic choke
Air filter with rocker wheel
K-value as per Directive 2006/42/EC 2,5 dB(A); 2 m/s2